SMW Autoblok Vise System Provides Omnidirectional Clamping
The Plus5 V5 Zero Point Vise system interfaces with all industry-standard products using 52 mm or 96 mm pin spacing, enabling it to readily become part of existing workholding systems.
Share
SMW Autoblok’s Plus5 V5 Zero Point Vise system locks and unlocks pins with only 180o rotation. Omnidirectional clamping is said to ensure uniformity while performing precision, all-directional, clamping. This zero-point vise interfaces with all industry-standard products using 52 mm or 96 mm pin spacing, enabling it to readily become part of existing workholding systems.
The V5 Vise system provides self-centering operation for five-axis machines. The device has fully protected and sealed lead screws and incorporates SinterGrip inserts for multivise integrations and eliminating dove tailing or crimping operations. The vise can locate, support and secure workpieces in a variety of manufacturing operations, including machining, welding and assembly.
The pin-locking mechanism consists of a cam that is operated using an eccentric pin. The cam locks all four pins simultaneously, which is said to guarantee precision performance and clamping force. The force vector transmission system acts by binding the pins uniformly and in all directions.
Additional features include high-precision, self-centering clamping with maximum repeatability; compact design for ease of accessibility; a wide clamping range; a clamping force up to 40 kN (80 Nm) and a jaw width of 87.5 mm.
RELATED CONTENT
-
Dillon Soft Top Jaws Improve Concentricity, Chuck Balance
The soft jaws are designed to provide better concentric performance chuck balance, as well as enable a longer jaw life because of the increased jaw accuracy.
-
Jergens Workholding Solutions for Improved Machining
IMTS 2022: Jergens expands its range of workholding products with the Ball-Lock, ZPS, Quick-Loc, Fixture Pro and OK-Vise to improve precision machining.
-
Workholding System Features Quick-Change, Modular Design
PMTS 2023: Mate Precision Technologies’ 52/96 workholding system is engineered to maximize holding power for 3-, 4- and 5-axis machining centers to improve manufacturing productivity.
