Ingersoll Cutting Tools
The Precision Machined Parts Industry's Leading Information Resource
Subscribe
Cutting Tools
Published

EWA Fine Boring Head for Fully Automatic Closed-Loop Operations

Appears in Print as: 'Fine Boring Head for Fully Automatic Closed-Loop Operations'


IMTS 2022: Big Kaiser’s EWA Automatic Fine Boring System is said to perform closed-loop boring operations without a human operator, eliminating the need to stop the spindle to manually adjust the boring tool and resulting in reduced cost, improved accuracy and minimized scrap.

Angela Osborne

Managing Editor, Production Machining

Share

Read Next

Photo Credit: Big Daishowa

Photo Credit: Big Daishowa

The Big Kaiser EWA Automatic Fine Boring System from Big Daishowa is said to perform closed-loop boring operations without a human operator. The company says this breakthrough eliminates the need to stop the spindle to manually adjust the boring tool, which results in considerable time savings. Also, eliminating human interaction is said to reduce cost, improve accuracy and minimize scrap.

The adjustment range of this fine boring head is said to enable the handling of multiple bore sizes with the same tool and ensure a repeatable boring process. The fine boring head is available in two sizes, one with a boring range of 02.677"-5.276" (068-134 mm) and the other with a range of 0.394"-2.126" (010-54mm). EWA kits are also available for each of the head sizes. These can include inserts, insert holders, a controller antenna and protective case. 

The EWA can be used on machines with BT/BBT30-40-50, CV/BCV(SK)40-50, BIG CAPTO 5-6-8 and HSK-A63-80-100-125 spindles. The automatic fine boring system can be integrated in three primary configurations — fully integrated, PC control or tablet control. 

A fully integrated system has the EWA control software running directly on the machine tool control via an app or technology cycle, requiring no external control device. The fully integrated system can only be integrated on new machine tools. 

For legacy machines, a PC interface between the machine tool and the EWA is said to provide a fully automated, closed-loop control cycle. Commands are sent from the machine tool to the EWA, automatically adjusting the tool in synchronization with the machining process. The PC acts as a synchronization interface between the machine tool and the EWA. It stops the machining cycle after the touch probe makes a measurement, reads the result and sends the corresponding adjustment value to the EWA. After the EWA has been adjusted, the PC notifies the machine tool to continue the process. 

The EWA can also be operated as a standalone tool, controlled manually with the Big Kaiser app on a tablet or smartphone. This enables the option to measure bores using an in-machine probe or manually, and to make fast adjustments in the app. Adjustments also can be done semi-automatically, where the head will move to pre-entered diameter values after a stoppage.

RELATED CONTENT

  • Advantages of Cellular Manufacturing

    Manufacturing cells are used to minimize product movement as well as materials, equipment and labor during the manufacturing process. By reducing cycle times and material handling, these cells help shops more easily meet customer demands regarding cost, quality and leadtimes.

  • Selecting the Right Milling Tool for Any Machining Task

    High-performance milling cutters combine high cutting data with long tool life and efficiency, but certain factors must be considered when selecting tools for different machining tasks.

  • The Many Sides of Workholding

    Here's a broad look at different ways to approach workholding, from bar feeders to collet chucks to robotics.

Horn USA